Not available any more!!! archive items D-Power Antares UBEC 8A battery switch

D-Power 9204 Antares UBEC 8A battery switch

The high-quality Antares UBEC 8A battery switch has been specially developed for use in radio-controlled model making. The output voltage can be selected via a switch on the UBEC between 5.0V and 6.0V. The input voltage is 7.0V - 21.0V (2-5 Lipo). The UBEC has an output of 8A permanent and a short-term peak of 15A. The operating status is indicated by an LED.

BEC
The Antares UBEC 8A battery isolator enables the receiver and the servos connected to it to be powered directly from the drive battery. With the UBEC, a model can be operated without the addition of the drive battery, a further power supply such as a receiver battery.

battery switch
The Antares UBEC 8A battery backup is equipped with a double input function. This allows the connection of 2 batteries for power supply. For this purpose, the "main battery" and a "backup battery" are connected. As soon as the voltage of the "main battery" is 0.5V lower than that of the "backup battery", the battery switcher changes to the "backup battery". The process of "0.5V ​​deviation rule" is automatically maintained for the entire operation.

features:
- Double input function - Connection of 2 batteries possible
- 2 JR servo plugs for power for maximum performance
- Reverse polarity protection at the input and output
- Thermal overload protection
- Status LED display

Technical specifications:
- Features Antares UBEC 8A battery switch
- Output voltage: 5.0V or 6.0V
- Input voltage: 7.0V - 21.0V (2-5S Lipo, 5-15S NiMH / NiCd)
- Output current: 8A duration / short-time 10S = 15A
- Weight: 59g including cable and plug
- Dimensions (L x W x H): 54x37x10 mm