FesEx-Uni8 System Hacker 10107849

FES Ex-Uni8 System Hacker 10107849

Item no.: 10107849
EAN: 4250320253327

A very easy removable prop hitch transforms your scale glider from an electric model to a pure glider and vice versa in seconds. By lightly pressing on the prop driver locking pin, you can pull off the prop driver assembly. The model remains a full glider with the option to self launch. Adaptable to a wide range of engines and models.

- FesEx-Uni8 = With ball detent pin 8mm, for medium and large glider models and motors with 8mm shaft (5 and 6mm shaft adapter optional)
- Uncomplicated installation without cutting off the fuselage nose and thus preserving the original look and resale value
- The FES Ex-Uni8 shaft adapter does not protrude through the fuselage nose - not visible from outside when the propeller is removed
- Aerodynamically negligible - small LS driver, close fitting propeller blades
- Safety for pilot, helpers and spectators
- Can be attached and removed from the outside in seconds without tools
- Propellers can be safely stowed away (e.g. in the fuselage or trouser pocket)
- A pull line can be clicked into the latching device to pull the model to the starting point and back.
- Made in Germany by Torcman

Technical data:
- maximum power transmission: 3.5kW
- maximum speed: 15000 rpm
- diameter ratchet sleeve in front: 12mm
- diameter front bearing bulkhead: 32mm
- minimum distance model nose > motor bulkhead (length of detent sleeve): 60mm
- for motor shafts with 8mm (adapter to 5 and 6mm motor shafts under the tab "Accessories")
- Prop driver width: 31mm
- Propeller mount: 8mm
- Length of the detent sleeve: 60mm
- Weight: 87g

Scope of delivery:
- Detent sleeve, ball detent pin with prop driver, bearing shim with ball bearing, mounting sleeve.

Translated with www.DeepL.com/Translator (free version)