Graupner mz-18 Transmitter - HoTT 2.4GHz Remote control 9 channel S1005.77

Graupner mz-18 transmitter - HoTT 2.4GHz remote control 9 channel S1005.77

Item number: S1005.77
EAN: 8809403498245

Graupner mz-18 HoTT remote control (9-channel)
The Graupner mz-18 remote control with 9 channels is the perfect transmitter for almost all model aircraft. The transmitter is particularly suitable for advanced RC pilots. The proven Graupner 2.4 GHz HoTT technology guarantees interference-free and delay-free transmission, even over long ranges. The Graupner mz-18 has a 3.5 TFT colour touch display. Received telemetry data can be clearly read and programming can be carried out directly on the transmitter. As an additional safety feature, the mz-18 has an intelligent voice output - via loudspeakers or headphones. This provides telemetry data, warnings, alarms and vario signals.
The mz-18 can store up to 30 models internally. If additional models or telemetry data are to be stored, the mz-18 has a micro SD card slot. This means that the memory can be easily expanded.

General features
- HoTT (Hopping Telemetry Transmission) bi-directional 2.4GHz technology
- 75 hopping frequencies for secure transmission
- 9 channels
- 3.5" TFT colour touch display for easy operation
- Intelligent voice output of telemetry data, warnings, alarms and vario signal via loudspeaker or headphones
- Real-time data transmission with optional sensors (vario, GPS, fuel, temperature, voltage, current, speed and much more)
- Teacher/student system wireless or with cable
- Binding of multiple receivers possible
- Stick units with ball bearings (8 units in total)
- Micro SD card slot for model memory expansion and telemetry data recording
- 30 model memories
- Model copy function
- Can be updated via USB
- Model type: helicopter, flying model (normal or delta), glider model
- Numerous servo settings (travel, limit, reverse, centre position)
- DualRate and Expo, separately adjustable for each flight phase
- 6 flight phases
- Helicopter type: 1 servo, 2 servo 180°, 3 servo 120° (2 pitch or 2 roll), 3 servo 140°, 4 servo 90°
- Pitch curves (7 points) can be set separately for each flight phase
- Throttle curves (7 points) can be set separately for each flight phase
- Phase trims for pitch and throttle
- Swashplate limiter function
- Swashplate mixer function
- 5 linear mixers
- 3 curve mixers
- Numerous model aircraft types from 1QR to 4-flap surfaces
- Elevator: 1 HR, 2HR, V-tail
- Snap roll function
- Aileron differentiation, separately adjustable for each flight phase
- Butterfly function
- Simple and extremely fast binding
- Free channel assignment (channel mapping), transmitter and receiver mixing functions and all servo settings can be easily programmed
- Binding of any number of receivers for channel expansion (max. 16 channels). The last receiver bound transmits the telemetry data
- Future-proof thanks to update capability via USB interface
- German-language menu navigation (other languages on the enclosed SD card)

Maximum safety
- Extremely long range
- FHSS, frequency hopping over up to 75 channels
- Maximum interference immunity thanks to optimised frequency hopping, wide channel spread and antenna diversification
- Intelligent data transmission with correction function
- Range test and warning function
- Undervoltage warning
- Numerous fail-safe functions
- Key lock function to prevent unintentional adjustment of menus

Highest precision
- Shorter response times can be set (10ms period time)
- No additional delays due to module processors. The entire hopping management is carried out directly by the 32-bit main processor.
- Synchronised servo operation possible thanks to simultaneous control of the servo outputs in blocks of 4

Unique pilot feeling
- Largely delay-free control reactions thanks to direct processing
- Telemetry evaluation in real time
- Wireless teacher/student function

Technical data
- Channels: 9
- Model memory: 30 (expandable)
- Approx. dimensions: 194 x 287 x 112 mm
- Weight approx.: 940 g
- Frequency: 2400 ... 2483.5 MHz
- Modulation: 2.4 GHz FHSS
- Range: approx. 4000 m
- Power consumption: 510 mA
- Operating voltage: 3.4V to 4.8V
- Temperature range: -15 to +55°C

Scope of delivery
- mz-18 HoTT transmitter
- 4000mAh LiPo transmitter battery
- Transmitter charger
- USB cable
- USB PC interface adapter
- USB adapter cable
- Transmitter strap