Not available any more!!! archive items DPS-25 Akkuweiche 25A mit Sicherheitschl

item number: ACT01008001

Order quantity {quantity} {pc}

Unit price: {PRICE} EUR

Quantity:

z.Zt. nicht lieferbar  Delivery time: z.Zt. nicht lieferbar

incl. 19% VAT. without tax
EUR 72,50 EUR 60,92
plus Shippingcost

DPS-25 battery switch 25A with electronic safety switch

Art.-No .: 01008001
EAN: 0805627059505

features:
- Battery switch with electronic safety buttons
- High current power FETs for 25A continuous current (40A short) with the lowest internal resistance in the switch.
- LED display for each battery
- 0.5 sec safe interruption bridging against switch bouncing and vibration
- High current supply to the receivers with 3x Futaba with quality gold contacts
- Absolutely vibration-proof thanks to SMD technology
- No mechanical wear
- Ideal for all applications with strong digital and power servos
- Power supply for the servos from 1 or 2 high-current batteries
- voltage drop max. 0.2V at 20A
- Automatic switchover in the event of a battery failure
- Only passive, fail-safe electronic components, no software

description

The DPS-25 is used to switch on a receiving system safely and wear-free, to supply it with high current for best servo performance and at the same time to increase safety by using 2 separate receiver batteries for battery redundancy. Of course, the DPS-25 can also be used with just one battery as a pure receiver switch.

In order to be able to use the optimal performance of strong and fast servos at all, a power supply is required, which leads the necessary high currents without loss directly to the servo sockets on the receiver.

In addition, the power supply must still work even if a battery fails. The DPS-25 provides these safety functions while minimizing components prone to failure. This results in optimal protection against vibration and contact problems. The switching output stages used ensure maximum and loss-free current flow, the internal resistance is considerably lower than the contact resistance of mechanical switches.

Due to the large cable cross-sections in the supply lines to the receiver, the maximum current is fed directly to the servo sockets, which enables the servos to develop their possible power and performance in the first place.

The DPS-25 has the tried-and-tested T-plug system as battery connection, and 3 original Futaba plug cables (contact socket) are attached to the receiver. These special contacts exclusively allow continuous currents of up to 6A, the highest value for this plug-in system. The cable cross section is 0.5mm. The negative conductor is made of silver. This means that the full power of the battery switch or the battery used can be passed on directly to the servo cables.

NOTE: Input voltage = output voltage, no voltage reduction, the servos are supplied directly with the battery voltage!

Please also note our articles in FUTAPEDIA on the subject of cables and connectors.

Technical specifications:
- Input voltage 4.5 - 8.4 V
- Total power: up to 300 W.
- Weight: 25 g
- Dimensions: 46x17x11 mm

Customers who bought this product also bought:

Already seen?