AMXPlanes Talon EDF Jet 1100mm EPO PNP blue Amewi 24119

AMXPlanes Talon EDF Jet 1100mm EPO PNP blue Amewi 24119

Item number: 24119
EAN: 4260768510074

We present our first 80mm EDF sport jet, the AMXPlanes Talon, in the unique and worldwide exclusive SIBA design with remarkable features such as a Hobbywing 100A speed controller, a 3280-2200KV brushless motor, a total of 8 digital servos with metal gears, lots of power (thrust over 1:1) and a super finish that is second to none.

The construction of this largely prefabricated PNP model is limited to attaching the elevator and the wings. All parts are screwed together and all cables, the edge arc lighting, the undercarriage and a distribution board on which all electrical components converge are pre-installed in the model. Servo extensions are integrated in the fuselage on the elevator. The wings are connected to the counterpart in the fuselage via a multi-pin connector and fastened with four screws. This provides the connection to the ailerons, the landing flaps, the lighting and the undercarriage. The undercarriage is electric, made of metal and towed. Bumps during take-off and somewhat harder landings are no problem. Thanks to the ample power of the finely balanced 80mm 12-blade injector and the high-performance brushless motor with a specific speed of 2200KV on 6S, take-offs are possible even on grass after a short take-off distance. The achievable top speed is over 200km/h, the flight time with e.g. 5000mAh 6S is approx. 5-6 minutes (or more depending on flying style).

The landing flaps can be extended for landing, which significantly reduces the speed of the model.
The Talon combines a thoroughbred sports jet with good-natured flight characteristics - making it suitable for both professionals and pilots with fewer flying hours.
This beautiful plane is supplied in a multi-coloured printed cardboard box with a high-quality polystyrene inlay in which each part has its own place. This means that nothing can slip out of place.

Features:
- LED lighting in the surfaces
- High-strength material with a very smooth surface and a multi-coloured paint finish
- All metal gear servos already installed
- Landing gear already installed
- Magnetic nose (simply falls off in the event of hard impacts and is therefore much more durable)
- High-performance drive ready installed and finely balanced
- Turbine-like sound
- Very wide speed range (slow to very fast)
- 100A controller with 5A BEC
- Pre-installed distributor board for all control surfaces, lighting and undercarriage. This means that the model can also be easily operated with a 6-channel receiver/transmitter

Technical data
- Wingspan: 1100mm
- Length: 1312mm
- Weight: approx. 2560g depending on battery
- Main material: EPO foam and plastics
- Undercarriage: electric metal, towed
- Thrust: over 1:1
- Motor: 3280-2200KV
- ESC: Hobbywing 100A / 5A BEC
- Servos: 5x 13g Digital MG / 3x 9g Digital MG
- Top speed: over 200km/h
- Skill level: advanced/professional
- Building time: approx. 20-30min

Required accessories:
- Transmitter/receiver min. 6-channel
- Battery 4000-5000mAh 6S XT 90
- charger

Scope of delivery
- Model PNP
- Velcro battery strap
- Operating instructions DE/EN