ASW-17 - 500cm Scale Segler voll-GFK ARF Special Offer!!!! With KST Servos

ASW-17 - 500cm scale glider full-GFK ARF+ D-Power

Item number: DPASW5000
Article code: 4251014715701

Off into the thermals!

The ASW-17 from D-POWER is a true to original glider model in full GRP construction. Just like the original from Schleicher, this replica on a scale of 1:4 impresses with its excellent thermalling flight characteristics and its aerobatics suitability.

Once the ASW-17 is in the air with the optional aero-tow release, the model will enchant you with its wonderfully realistic flight characteristics and excellent gliding characteristics. Very stable circling in thermals is one of the model's outstanding features. In combination with the flaps the ASW-17 can be adapted to different weather conditions. And thanks to the various brake options, the glider can be landed safely and true to model even in narrow spaces. Optionally the ASW-17 is fully prepared for the additional use of spoilers.

Features:
- Aerobatic thermal glider
- Absolutely true to the original
- completely manufactured in high-quality GFK shell construction
- all parts painted in the mould
- without identification - offers space for a personal identification
- spacious hull with plenty of space for electronics
- HQ3.0/15 Wing profile
- 4-part wing with aluminium plug-in tube / square carbon fibre plug-in tube
- CFK reinforcements in fuselage and wings
- all oars are designed as Elastic Flaps
- removable cockpit including instrument panel
- short construction time thanks to high ARF+ prefabrication level

ARF+ means an extremely high degree of prefabrication
We have deliberately decided not to offer you this model with built-in motors and servos. With the ARF+ equipment you have the possibility to equip your glider according to your preferences. All cable layers are completely laid out, so that you only have to connect your electronic components to the finished cable harness and plug the cables in the fuselage into the receiver. Spend minimum time in the basement - and maximum time on the airfield.

- Fully installed and integrated wiring harness
- Ready installed servo frames
- MULTIlock® wing locking system installed
- MPX high-current connector built into the fuselage and wing sections
- Pre-turned booms, all linkages completely installed
- Laser-cut battery board ready installed in the fuselage
- Prepared for the use of 440 interference flaps (cable harness already installed)
- Canopy lock
- GRP rudder horns mounted on the wings

Technical data:
- span width: 500 cm
- hull length: 189 cm
- Wing profile: HQ3.0/15
- Wing area: 71,8 dm²
- Flying weight approx.: 6500g (incl. trim lead)

Required accessories:
- Servos Rudder: 1x D-Power REX-6180SG HV Coreless or 1 x KST MS825 HV 35kg/cm 8.4V
- Servos elevator: 1x D-Power REX-6180SG HV Coreless or 1 x KST MS825 HV 35kg/cm 8.4V
- Servos Aileron: 2x D-Power REX-265SG HV Coreless or KST X12-508 12mm digital Micro Servo HV
- Servos Flaps: 2x D-Power REX-265SG HV Coreless or KST X12-508 12mm digital Micro Servo HV
- spoilers: 440 (optional)
- towing hitch: optional
- Receiver: min. 8-channel
- Receiver power supply: 2 x receiver battery Li-Ion 3,12Ah 7,2V 2xuni/EH 20A discharge current with a switch (we offer different possibilities)

Special offer set KST:
- Rudder: KST-CM653  4,8-8,4V
- elevator: KST-CM653  4,8-8,4V
- Servos aileron: 2x KST-MS325
- Servos flaps: 2x KST-A13-610
As a set price only together with this ASW-17 Instead of €1962,90 only €1525,00