14010 Servo Falcon 4,8-8,4V 23,5x8x20mm

Graupner 14010 Servo Falcon 4,8-8,4V 23,5x8x20mm

Thin wings? No probelm!

The Falcon Servo is an 8 mm miniature servo with full aluminum housing and metal gear for the highest demands when it comes close. The servo has very good torque and stall force and has a considerably high speed at these values.

The servo connection cable has a length of 100 mm and is ideal for installation in wings or hulls of smaller models.

The housing and the output gear (14T) are adapted to today's standard dimensions. The servo is perfect as a wing servo.

The servo arm is screwed with an
hexagon socket screw.

Included in the set:
- 1 x Servo
- 1 x Hardware pack
- 1 x Aluminum servo arm
- 1 x High quality "Controlled by the wild" sticker

Specification:
- Torque at 4.8 V, approx. [Ncm]: 6.4 Ncm
- Width [mm]: 8 mm
- No-load current drain: 5 mA
- Transit speed at 4.8 V, approx. [Sek / 40°] : 0.08 Sek/40°
- Holding torque 6.0V, approx. [Ncm]: 28 Ncm
- Charging rate at 4.8 V approx. [mA]: 650 mA
- Height [mm]: 20 mm
- Transit speed at 6.0 V, approx. [Sek / 40°] : 0.07 Sek/40°
- Weight [g]: 9 g
- Transit speed at 7.4 V, approx. [Sek / 40°]: 0.06 Sek/40°
- Torque at 6.0 V, approx. [Ncm]: 8 Ncm
- Holding torque 7.4V, approx. [Ncm]: 35 Ncm
- Overall length [mm]: 23.5 mm
- Charging rate at 6.0V approx. [mA]: 800 mA
- Dimensions [LxWxH in mm]: 23.5 x 8 x 20 mm
- Holding torque 4.8V, approx. [Ncm]: 22 Ncm
- Torque at 7.4 V, approx. [Ncm] : 10 Ncm
- Bearings: 2 Ball-Bearing
- Charging rate of 7.4 V approx. [mA]: 1000 mA
- Gear unit: Both mg
- Operating voltage neutral [V] : 4...8.4 V
- Neutral impulse: 1.5 ms
- Max. operating frequency [ms / Hz]: 330 ms / Hz
- Field of application: Aircraft
- High-Voltage: yes
- Coreless: +
- Length [in]: 0.92 in
- Torque at 6.0V, approx. [kg.cm] : 0.8 kg.cm
- Torque at 7.4 V, approx. [kg.cm] : 1 kg.cm
- High [in]: 0.78 in
- Width [in]: 0.31 in