NE2529M2 Galaxy Visitor 3 FTR RTF 2.4GHz Mode 2

Robbe NE2529M2 Nine Eagles - Galaxy Visitor 3 FTR RTF 2.4GHz Mode 2

Mini Quadrocopter with altitude stabilization and onboard HD Photo / Video Camera
The GALAXY VISITOR 3 is a 2.4 GHz Mini Quadrocopter of the latest generation. Through the sophisticated 9-axis gyro and Stabilisierungssy system a very accurate and simple control feel is possible. The simple control and the high intrinsic stability of the GALAXY VISITOR 3 is an especially good choice for beginners.
The maneuverability of this quadrocopter is adjustable and is so to ensure that the birds with the GALAXY VISITOR 3 is not boring even for advanced pilots. Also for outdoor use in light winds, the model is readily suitable. The electronic stabilization height of the GALAXY VISITOR 3 a particularly quiet Hover is possible.
Especially for photo or video recording, this is a very useful feature, because it relieves the pilot to a control function and allows for better shots.
The GALAXY VISITOR 3 provides the following advanced special functions:
"Height stabilization" function
Beginner mode:
In this mode, the max. Altitude limits. Even at full scale on the throttle stick, the model is not higher than 2-3 m fly. We moved the throttle stick back down, the model responds accordingly. This mode should make it easier for beginners to control the copter to avoid crashes and collisions.
Height stabilization mode:
Is moved to this mode, the throttle stick from its current position quickly in the middle, the current Gas value is stored and the model keeps its height when hovering.
Normal mode:
In this mode, the model responds to steering movements as a normal Quadrocopter.
"Headless Flight" function
At normal control of a remote-controlled helicopter, the control direction is always seen from the perspective of the model ie forward, backward, and left and right refers to the direction of flight of the model or the view of the pilot "in the model". The downside is the need to rethink when traveling towards himself. Right and Left are now for the pilot "in the model" and the Pilotenmit the remote control precisely the opposite. This "conventional flight mode" is difficult especially for the beginners in the beginning to dominate. In a Quadrocopter there is also the difficulty that there is something more severe in such models due to the symmetrical design is to identify where the model is front and back. Wherefore has the GALAXY VISITOR 3 via an "intelligent control" mode. If the model is operated in this mode of control is always all directions refer to the pilot with the remote control transmitter in hand. This means that the model always flying for pilots, if this is to pull the elevator stick out and getting away from the pilot, when the elevator stick is pushed forward. Right and Left also blebt always the same in relation to the pilot. Where the actual front of the quadrocopter shows, plays no role.
"Auto-Return" function
The auto return function causes the model, no matter what attitude out immediately and automatically returns to the pilot. Press and release the AUX 1 button on your remote control to start the Auto Return function. It does not matter in which flight mode you are.
"Auto Brake" function
The GALAXY VISITOR 3 has an automatic braking function. If you suddenly release the roll / pitch stick in forward flight, the model slows the forward flight fully automatically to limbo. This function collisions with obstacles can be avoided.
"Signal Loss" function
If during the flight, the radio connection is interrupted (eg if the copter is out of range, the transmitter fails, or the signal is disturbed, etc.), the model at a height of about 2-3 m for about 5 seconds remain in hover and then drop selbsständig to landing.
Futaba Transmitter Ready (FTR)
The 2.4 GHz remote control of GALAXY VISITOR 3 uses the standard FTR (Futaba Transmitter Ready). This means the transmitter and receiver work with the Futaba S-FHSS code and are compatible with Futaba S-FHSS remote controls. Thus, the GALAXY VISITOR 3auch directly with all high quality Futaba S-FHSS remote controls are flown - ideal for all assembly and transfer passengers.
Technical data:
- Main Rotor Diameter: 147 mm
- Length: about 163 mm
- Width: approx 163 mm
- Height: about 78 mm
- Flight Battery: 3.7V / 1,200 mAh / LiPo
- Flying Weight: about 135 g

RC functions:
Pitch, roll, rotate, climb / descent. Video and photo function
The new generation - GALAXY VISITOR 3
Scope of delivery:
1x High End Mini Quadrocopter fully assembled and ready to fly set
1x LiPo battery 3.7 V 1200 mAh with reversed polarity connector
1x 230V Battery Charger
1x 2.4 GHz 4- Kanai-transmitter in Mode 2 (Nr.NE2529M2) or Mode 1 (Nr.NE2529M1)
4x AA batteries
4x Spare propeller
1x screwdriver
1x detailed operating and flying instructions
1x Camera Kit with Micro SD card reader and camera resolution 1280x720 pixels HD
Translate by PC